# 1
Thule Passage Trunk Bike Rack for 2 Bikes - Hanging Style
Ordered online, it shipped the same day. Received it 3 days later. There is a little assembly, but, pretty simple. It took me less than 15 minutes to install and no tools were needed. It is adjustable to be used on many different auto types, but, the instructions were very clear about how to adjust it to fit my 2011 Ford Edge. I have used it twice so far to transport my bike. There are a couple of items that are inherent in the design, not a flaw, but, you need to be aware of them. First, you can't use rear window wipers. Second, the back-up alarm goes nuts because it registers a bike less than 6 inches behind you (I tolerate it for the few seconds it takes to back out of my driveway or out of a parking lot). Third, there is a little flexibility, it is held on with straps and clamps, not bolts, so, it bounces a little when you go over bumps or make sharp turns, however, it holds the bike fast to the frame and stays on the car. I use mine to transport my bike on short trips around town to bike trails. On a long trip I would suggest checking that the straps remain tight from time to time during the drive.
Positive: The product is well thought out and works for a wide range of automotive vehicles. It comes with interesting dampers that i think work. Instructions seem to be translated from another language, but are quite good, accompanying pictures make installation straightforward. A test drive over speed bumps shows that the rack will support the bike for all travel needs. It can be disassembled , collapsed and stored in the trunk. Downside: The rack is made for the classic triangular shaped frame: horizontal cross bar, "male" bike. For bikes without the horizontal bar, mounting is a little less satisfactory. Such a bike can only be mounted on the outside mounts. Cannot use the damper on one side. Picture shows the mounting. as to a design solution, maybe brackets could be replaced with smaller profile, some adjustability? however, as it is, vibration control is good and adjustability with smaller profile would have vibration concerns.
# 2
Thule Hitching Post Pro Bike Rack for 4 Bikes - 1-1/4" and 2" Hitches
Super sturdy and easy to use/install. Love the bolt hitch attachment, keeps the rack from swaying/wobbling. Attachment points are very solid and the anti swing clips keep your bikes from smashing into each other and the rack during fast starts and stops. I use for all types of bikes, road, mountain, cruiser, children's, etc.
The good: I like the way the bikes are held in and the ability to add the upright adapters to the bike frame holders. The straps are quality too. For a jeep with a spare tire, this is the perfect length to clear it. This rack is 5 stars from the bike holders to the base of it. The bad: the 2"receiver adapter and bolt are insufficient. I wish they made this in a solid 2" hitch. The entire setup is held into the receiver by a very short bolt. It only goes about half way into the receiver tube. So your hitch is only "secured" on one side. A hitch pin or bolt should go through the receiver tube completely imo so it can be secured on the other end with a retaining clip or nut. Because this only goes in the one side, the entire weight of the rack plus bikes are held tight to one side of the receiver by the undersized bolt and washer. A few bumps down the road and that bolt loosens. Now instead of distibuting the weight of the rack and bikes on the receiver and post, it's completely up to the bolt to keep you from losing the rack. The bolt threads get damaged too. I took this down a dirt road and nearly lost everything. I had to buy my own bolt with hd fender washers and lock washers to correct this. Thule should've provided this from the start. The current short bolt design where only one side of the receiver secures the rack is unacceptable. This rack is 1 star at best for the connection to the receiver.
# 3
Swagman XC2 Bike Rack for 2 bikes - 1-1/4" and 2" Hitches - Frame Mount
I own a 2005 Jeep Wrangler X with 31x10.5x15 oversized tires and wheels. I installed B6196001 HighRock 4x4 Oversize Tire Carrier by Bestop to carry larger spare tire. I needed a bike carrier that would carry our two crusier bikes and clear my spare tire. After measuring, I ordered: -> S64650 - Swagman 2-bike carrier -> 80300 - 7" Hitch Adapter 2" to 1-1/4" Trailer Hitch Receiver -> RM-061 - Roadmaster Quiet Hitch for 2" Trailer Hitches Our order arrived very quickly, etrailer.com upgraded the shipping. All these products arrived well packaged and without damage. In 15 minutes I had every thing assembled, installed on my Jeep and bikes loaded. The bike carrier is very well constructed, finish is excellent and easy to adjust. When adjusting wheel loops and loading bikes, make sure you pay attention to bike pedal position. I chose this extension because I did not want to use the adapter that comes with the bike carrier, I wanted as few parts as possible to keep rattles to a minimum and gives me more options for towing. The anti-rattle bolt/pin firmly secures the bike carrier to the extension and the Roadmaster Quiet Hitch keeps the extension adapter from rattling in the receiver. Road tested approximately 25 miles over rough city roads ( including railroad tracks ), county roads and highway. Bikes traveled very well without any rattles. I can remove my complete setup quickly, fold and put in rear of Jeep if desired. I am very well pleased with my purchase. Note to etrailer: Please consider offering Roadmaster Quiet Hitch in black to match receiver and accessories. Paul In the Land of Oz . . . Just South of the Yellow Brick Road!
It works great! Easy, quick, you know. One needs to screw in the hitch bolt, for some reason, before latching it. Other than that, it makes going bike riding way easier.
# 4
Kuat Trio Roof Bike Rack - Fork Mount - Clamp On - Aluminum - Black and Polished Chrome
Installed all products after having watched videos and read through pdf instructions. The Yakima JetStream roof rack system is outstanding (with one exception) - instructions and videos facilitated the installation. The Yakima system is the only one I could find for my car (Mercedes E450 Coupe), as the car's panorama roof glass extends to the edges near the fixed mounts. The Yakima system is quiet, thanks to the ability to modify the crossbar pitch angles, and has a high-quality appearance that complements my car. And it is rock solid. The Kuat Trio bike tray is an outstanding low-cost, simple solution - well-designed and well-executed and installs to the Yakima JetStream bars flawlessly. I would recommend that Kuat include a 12mm x 100mm thru-axle in the Trio kit, as I had to purchase that part separately. Only disappointment is in the Yakima Landing Pad Covers that ship with the Landing Pad 22 (LP 22) kit. The covers do not snap tightly into place, and appear as if they were designed for a different Landing Pad. In summary, my Yakima/Kuat bicycle roof rack system exceeds expectations (except for the LP 22 Covers), operates flawlessly, looks great, and stores easily. It has given me high confidence in Yakima, in Kuat and in etrailer.com. Well done.
Great rack easy to install, light weight and well made.
# 5
Swagman XTC2 Bike Rack for 2 Bikes - 1-1/4" and 2" Hitches - Frame Mount
First-time rack buyer / owner / installer. The rack arrived in a timely fashion, maybe a day or 2 ahead of schedule. It was well packaged. I’m LOVING this bike rack. It was easy to put together and to mount on my new Honda Passport. Thus far, no squeaks in my 2” receiver. Hardest part of initial set-up is figuring out the best way to position two bikes. Trial & error and some patience. The directions weren’t clear as to where the 2 left-over screws went. I found the answer in another review and have posted a pic in case others have the same problem (photo with pen pointing at screw). These screws go in the underneath side of both of the folding arms. They appear to keep the wheel wells from sliding off in case in you drive with an empty, un-folded rack, and forgot to tighten down the wheel wells. The folding arm push / pull pins can be difficult at times. I coated the tips with some lube. That and a little jiggling seems to solve that issue. I guess it’s better for the pins to be snug vs popping right out. I added a small Master lock to the hitch pin (in lieu of the provided cotter pin) as a theft deterrent. I read that a 3/16 shackle lock will fit into the bike clamp down arms to also act as a deterrent. I had an old 3/16 lock that did snugly fit and appeared to be locked. HOWEVER, I yanked on the lock and it came open as there isn’t quite enough clearance for the shackle to lock. I discovered that longer 3/16 shackle locks are hard to find. Have attached a photo of the lock that actually fits and works (Ace Hardware). One lock on the upper clamp down arm will secure both arms as the lower arm can’t be removed without removing the upper arm. The clamp down arms appear to be coated to prevent damage to your bike. I’ve tried a simple rag and ultimately settled on pool noodle pieces as a precautionary measure. I CAN NOT open my tailgate (regardless of whether or not the rack is fold up and in the bike carry position). If that’s a concern for you, then spring for the more costly titling version. My back-up camera still functions.
The Swagman XTC-2 platform bike carrier arrived very quickly from etrailer and in good shape, the actual carrier box is inside another shipper box, which I'm sure helped with its condition. Assembly was relatively quick and painless, even though the instructions could be a little more thorough. Installing the carrier on the back of our Jeep Patriot also was quick, it helps to have an extra ratchet & 3/4" socket laying around for just this purpose. Installing the bikes takes a little patience and trial and error the first time you try and put them on the carrier. It's easy enough to adjust the wheel holders to fit the wheelbase of your bikes, but for us at least, the challenge was trying to swing the vertical support bar up into position after putting on the first bike (closest to the Jeep). We couldn't angle the bike enough toward the Jeep to have the bar clear the bike. We learned that the easiest way to secure the first bike was to remove the ratcheting frame hooks altogether, put the bike in the carrier, swing up the vertical support bar, put in the pin, and then slide one of the frame hooks down on the bar. The outside bike is much easier because you can set the bike in the carrier at whatever angle you need, not being limited by the back of the vehicle. One thing we did to protect the bike frames was to use some foam pipe insulation as cushion between the frame hook and the frame (see pictures). Once you get a system for installing the bikes, it is very quick to load/unload them. The rack seems to be well made and doesn't wiggle excessively when traveling. All in all a good product for a good price, would definitely recommend it for anyone looking for a platform bike carrier.
# 6
Thule Passage 3 Bike Carrier - Trunk Mount
The side / bottom straps are seriously lacking. It has those straps you would find on a backpack, making it difficult to securely tighten down because of the angle. I'd usually have to pre-tighten them to a certain length, then forcefully shove the whole rack until it clipped onto my car. They really just need to be ratchet straps. Even then, one of the side straps came off while driving after hitting a small pothole and the whole thing dangled to one side - Luckily I was in a parking lot. I've also never been able to fit 3 regular bikes, only 2. It's really only a capacity of 3 if you have 2-3 slim bikes. The rubber is so wide that it makes it nearly impossible to slide certain bikes on. If you have a step thru bike with one of those crossbar adapters, I wouldn't even bother with trying this. Unfortunately I don't use this anymore since I'd be constantly worrying the whole thing will come off whenever I drive.
Fits perfectly on our Lexus CT200h. Only on the old LS400, the side straps have to be fastened to the wheel arch edge, since the upper trunklid gap is to narrow for inserting the strap hooks. Mounting of two bikes is (with some routine) quickly done, and they stay safe even for longer and faster routes. For transporting three (mountain) bikes, though, the design doesn't seem big and robust enough. Nevertheless, the price-benefit-fun ratios are way better than reasonable.
# 7
Kuat NV 2.0 Bike Rack for 2 Bikes - 1-1/4" Hitches - Wheel Mount - Gunmetal Gray
I'm so very happy with this rack!! It was fairly easy to assemble love the sturdy feel. Maiden voyage today the two Ebike's loaded easily and were secured. I think I made the right choice. Thank you
Love the fit and solid quality build of this bike carrier. Can't wait to try it out. I am using this carrier for two e-bikes and I am confident that it will hold up very nicely and will have no problem holding the weight of the 2 bikes.
# 8
Kuat NV 2.0 Base 2-Bike Platform Rack - 1-1/4" Hitches - Wheel Mount - Matte Black
Great rack! This is our third hitch rack: we had a 4-bike Thule for hanging bikes by their tubes and then a 2-bike Thule platform rack whose 100-pound rating didn't permit loading 2 e-bikes, so that was our criterion for the search that led to this purchase. Assembly was not intuitive, so we had to re-do a few steps, but the final product is excellent: very stable. Two cautions: (1) Be sure to check whether any panniers block your tail lights; (2) Always use the included lock because each bike's rear wheel sits on a relatively flat surface and a big bump might dislodge it if the back strap isn't firmly seated.
Bought a new Mazda 3 HB and decided to go with a hitch bike rack. I've had a Kuat Trasnfer bike rack. That rack did it's job, but I felt the Sherpa or NV 2.0 Base would be better in every way. I've bought hitches and Kuat from etrailer and I knew their online prices and customer service was the best in business so it was a no brainer to go back to buy another bike rack. It was a tough decision between the Sherpa and NV 2.0 Base, but I felt had all the right checks for me to go with the NV Base 2.0. Once I ordered the rack, it was shipped the same day and arrived at my doorstep a day earlier! The box was ok, but the packaging inside was excellent. The quality is top notch and the manual is easy to read. Not gonna lie, the rack is heavy. I knew it was going to be heavy after researching on it and it's not a big deal, but doing a solo assembly wasn't going to be easy. Luckily I had my son with me to assist. Assembly took 15min (with another person). Manual doesn't state NM torque, but I set it around 8-10nm to bolt down everything. Once I put it on the hitch, I turned the anti-rattle knob and it locked the bike rack down to the hitch like a vice grip. It's solid and wont budge at all! everything on this rack is sturdy and top quality. The bike and rack barely sways during the drive. I can't express how impressive this rack is! The only down side to this and it's not even the rack, it's the hitch lock pin. It feels like an after thought and it's too thin. it flops around. With the price I paid for this, I was hoping for something little better. Overall all, the Kuat NV 2.0 Base is hands down the best bike rack on the market and I'm glad I went with it.
# 9
Thule T1 Bike Rack for 1 Bike - 1-1/4" and 2" Hitches - Wheel Mount
I didn’t come with assembly instructions and couldn’t find any on the internet, but I figured it out pretty easily. Won’t fit fat tire bikes with big tube suspension forks, hold down lever hits fork, did some playing around and found it’ll fit over the rear tire with some maneuvering (I’ll have to mount the bike reverse) but it came to my address quickly and undamaged and works well.
Hi im happy with my purchase it is Easy to install took me 30min installing and adjusting parts. I like with the thule it has key lock and cord lock to wrap around the frame.i feel secure leaving my bike when ever i go to a restaurant to eat.And also i can open my back trunk with the bike on no hustle . Great product to any size of bike i will surely recommend this product looks amazing and durable
# 10
Kuat Sherpa 2.0 Bike Rack for 2 Bikes - 1-1/4" Hitches - Wheel Mount - Black
All in all pretty good. The arms that grab the front wheel have loosened a little bit and move side to side. They have never failed, just feel a little wobbly. The hitch receptacle is also hard to tighten but might be due to the receptacle it self. Used rack on a long trip and the bikes moved slightly side to side, but nothing serious.
Car: 2017 Honda CR-V This is a great rack! There's not a lot to the assembly, other than getting the first two long bolts in, those were tricky. Once those were in there, aligned properly, the rest of the assembly was pretty easy. Attaching the rack to the hitch receiver was the easiest part of the whole thing! The rack is really nicely portable, and will easily store in our apartment during the off season. It takes less than a minute to get it loaded into the hitch receiver. The cable lock is a little bit flimsy, but should hopefully deter casual thievery. What I would have loved to have seen were locks in the retaining arms as well, so those couldn't be messed with by strangers. Otherwise, this rack is really great, and I would highly recommend it.
# 11
Kuat NV 2.0 Base Bike Rack for 2 Bikes - 2" Hitches - Wheel Mount - Matte Black
I've taken this rack all over New England on the front of my Dodge Ram 3500 pick up truck with a truck camper. I had no idea it was possible to love a bike rack so much. After one drive I didn't ever worry about it again. So nice that it locks up when I am camping or taking a quick stop for food on the road. So glad I bought it from etrailer. They totally help me pick the perfect rack for my challenging set up.
Still very new, but what an awesome bike rack! Assembly was a snap and the rack is rock-solid when you secure it to the hitch receiver. etrailer was amazing too - excellent communication, price and fast, free delivery. Overall I am extremely happy with the rack and service!
# 12
Saris Freedom Bike Rack for 2 Bikes - 1-1/4" and 2" Hitches - Frame Mount
I had to put my electric bikes into this rack, backwards, to make them fit. Not ideal, but it works.The receiving 'trays' that are intended to provide support for holding the bikes, by being placed under the bike tires, are forced to be moved to a location that is not directly under the bottom of the bike tires. While it works in this manner, it is not ideal.For the support that attaches to the diagonal bike frame, we had to remove it from the vertical rail of the rack. We reinstalled it, upside down, because that's the only way we could make it fit, or 'grab', the bike frame. Again, we made it work, but it's not ideal. We chose to keep the rack because it was so much less expensive than the Thule rack we considered buying. The bike shop owner didn't agree with us. He observed that we are putting $3000 worth of bikes on the rack and risking that investment. So far, no problems, other than the ill-fitting installation.
With a few adjustments this rack has delivered. Needed to add additional strapping since the provide straps for securing the bikes to center bar were not long enough due to my ebike design (Velotric). My bikes are step through with a thick frame so provided straps won't fit. Simple adjustment with strapping resolved minor issue. Speed of 73 mph on the highway and some bumpy VT roads and this rack performed.
Kuat Transfer V2 Bike Rack Review - 2018 Audi A4
Hello neighbors it's Brad here at etrailer and today we're taking a look at the Kuat Transfer Bike Rack. Now this is a platform style two bike rack available an inch and a quarter. Also able to be adapted to two inches which is gonna be great on our 2018 Audi A4. Now our Audi today has a stealth hitch installed and that's gonna be a two inch receiver, but some of the other hitches that we offer are gonna be inch and a quarter and that's where this is a really nice option. My personal vehicle has an inch and a quarter and this is a bike rack that I've used on my own personal vehicle, but also you can put the adapter on and be ready for a two inch. So if you have a smaller vehicle or you just need a bike rack that you can transfer from car to car, this is gonna be a great option.
Yakima Trunk Bike Racks Review - 2014 Audi a4
Speaker 1: Toady on our 2014 Audi A4 we're going to be taking a look at the Yakima Half Back 2 Bike Rack and that's going to be partnered with a Y02636. As you can see, we do have a bike installed, so let's take a closer look and show off some of the features. Now if we start on the outside and work our way in, we're going to see on both of these arms we're going to have the bottle openers that Yakima puts on all of their bike racks. If you look at the cradles, we're going to see that they are stationary so they don't adjust really to accommodate any size or spacing between bikes; however, they do have this nice rubber TPE padding. Now what that means is that these little notches that stick out from our padding, they're going to act as shock absorbers for the frame of our bike during travel, and that's going to help protect it from any type of damage.If we look at our bike we're going to see that it is secure at three different points of contact. We're going to have two zip strips on the top of our frame securing the frame of our bike into the cradles, and then down here we're going to have this anti-rattle cradle.
Yakima Trunk Bike Racks Review - 2014 Audi a4 Y02637
Speaker 1: Today on our 2014 Audi A4, we're going to be taking a look at the Yakima HangOut 2 Bike Rack. And that's going to be part number Y02637.And as you can see, we do have a bike installed so let's take a closer look at some of these features. Now we're going to see that these cradles can pivot back and forth like so, and move up and down our rack to accommodate bikes of different sizes or even any length or spacing you might want between your bikes.We're going to see the bike itself is secured at three different points of contact. We have these two rubber straps that go around the top of the frame and latch on right here. And then right here we're going to have this anti-rattle cradle. Now once we get this strap, the frame of our bike into the cradle, that's going to prevent the bike from moving too much while you're traveling, preventing any type of bike to vehicle contact or bike to bike contact if you have two bikes installed.We come up here and look at the front wheel.
Hollywood Racks Express Trunk Bike Racks Review - 2014 Audi a4
Speaker 1: Today on our 2014 Audi A4, we're going to be taking a look at the Hollywood Racks Express 3 Bike Carrier. And that's going to be part number HRE3. As you can see we do have a bike installed so let's take a look at some of these features. Now this is a very economical choice of bike rack, if you're an avid cyclist I might suggest maybe looking at a more detailed bike rack. You can find a lot of those at etrailer.com. Or, if you're looking for something just to get your bikes from point A to point B this is going to be a great option for you.So if you come in closer, these cradles can slide up and down our rack to accommodate any spacing between your bikes you might want.
What our customers are saying:
"I ordered a trailer hitch and a bike rack carrier the order was shipped with in three days. To put the hitch on only took about 30 mins. only had to drill two 1/2 holes. fit like a glove."